1. Product Description
This series of vaporizer is an efficient and energy-saving heat exchange equipment that uses air natural convection to heat the cryogenic liquid (LO2, LN2, LAr, LNG, LCO2, LC2H4, LPG, etc.) in the heat exchange tube to completely evaporate it into gas. Its main advantage is as following:
1) No energy consumption, no pollution, green environmental protection;
2) Easy to install and maintain;
3) Special aluminum heat exchange, high efficiency, lightweight design, long service life;
4) Large diameter (φ200) special aluminum heat exchange tube; defrosting speed is very fast; effective inner fin structure; improve the heat transfer effect of heat exchange tube;
5) The "bridge" type connection element is beautiful and generous, and the stress caused by thermal expansion and cold contraction of each part is eliminated during working;
6) Optimized progress design; the pressure drop is minimized; there is no drift current phenomenon, and the flow rate is control within the safe range;
7) Special anti-oxidation treatment on the surface of heat exchange tube;
8) Sufficient design margin;
9) Advanced high pressure tube composite technology; so that the pressure tube and the heat exchange tube 100% full contact, to ensure the heat transfer efficiency;
10) All vaporizers are cleaned and manufactured in full accordance with oxygen service standards for safer use;
11) It can be designed and manufactured according to electronic standards;
12) Design conditions: ambient temperature -10ºC, relative humidity 70%, continuous use of 8-12 hours for gasification; The factors that affect the amount of gasification are: working cycle, ambient temperature, humidity, altitude, wind, sun light, use pressure, adjacent buildings, etc.
13) Applicable media: LO2, LN2, LAr, LNG, LCO2, LC2H4, LPG, etc.
14) Working pressure: 0.8-40.0 Mpa
15) Single flow: 50-16000 Nm3/h; combined type can be used for larger flow rate.
2. Company Profile
1) Yangzhou Giant Machinery Co., Ltd. is located in the cultural ancient city of Yangzhou Guangling Economic Development Zone. The company is mainly committed to research and development of LNG cryogenic storage tank, LNG skid-mounted filling station, LNG/L-CNG natural gas filling station, cryogenic industrial gas storage tank, petrochemical equipment etc., which is a professional company integrating design, manufacturing and engineering installation. The company has Other High-pressure Vessel (A2) special equipment production license, Industrial Pipe Installation (GC2) special equipment production license and ASME "U" "T" stamp issued by the American Society of Mechanical Engineering. The company mainly produces various types of cryogenic storage tanks, LNG liquefaction plant vessels, LNG/CNG gas filling station equipment, reaction vessels, heat exchangers, towers, non-standard vessels and engineering. Products are widely used in natural gas new energy, petrochemical, coalification, electric power, metallurgy and other fields.
2) The company has more than 300 employees, includes 6 senior engineers, 25 engineers, 30 assistant engineers and 60 other technical employees. The total fixed assets is CNY 350 million.
3) Lifting capacity for single is 100 ton, and bending capacity is 3500mm×150mm. Other more than 300 equipments include cutting, forming, welding, forging, testing, inspection, heat treatment, sand blasting, lifting and transportation. Handling capacity of metal material is around 50,000t. Separated working area has been set according to the kind of material like stainless steel, carbon steel, titanium alloy steel. We have been upgrading the quality of products and service depending on the experienced technical strength, advanced producing process, thorough inspection methods, strict management system and excellent after sales services.
4) Due to the hard working of all staff and the concern of customers and friends, we have been the member of Sino pec 1st class network supplier (No. 41489520), member of China National Chemical Corporation suppliers, member of China Industrial Gas Association, member of China Storage Association, and State High-tech Enterprise, etc.
5) By the concept of industrial contribution and harmonious with nature society, YangZhou Giant Machinery Co., Ltd is open to leaders and friends of all society to win the future together.
3. Fabrication Workshop
4. Main Manufacturing Equipment
| List of Main Manufacturing Equipment |
| No. |
Equipment Name |
Qty. (Set) |
Max. Capacity or Code |
Using Date |
| 1 |
Veneer Reeling Machine |
8 |
Max. Thickness: 3200×150 (mm) |
Sep. 2015 |
| 2 |
Traveling Crane |
47 |
Max. Lifting: 100 T |
Jan. 2010 |
| 3 |
Lathe |
7 |
CQ-5240, Max. Dia.: 4000 mm (Vertical) |
Sep. 2012 |
| 4 |
Drilling Machine |
4 |
GPB-4040, Max. Drilling: δ250mm Ф60mm (NC) |
May. 2013 |
| 5 |
Plate Shearing Machine |
1 |
Max. Thickness: 12 mm |
Aug. 2016 |
| 6 |
Edge Planning Machine |
1 |
Length: 12 m |
Dec. 2012 |
| 7 |
NC Gantry Cutting Machine |
2 |
GSII-4000, Cutting Thickness: 6-100 mm |
Mar. 2014 |
| 8 |
Manual Welding Machine |
80 |
ZX7-400 |
Mar. 2017 |
| 9 |
Automatic Submerged-arc Welding Machine |
8 |
FDC-1000 |
Mar. 2015 |
| 10 |
Surfacing Welding Machine with Pole |
1 |
|
Jun. 2015 |
| 11 |
Argon Arc Welding Machine |
20 |
WS-400 |
Mar. 2015 |
| 12 |
Air Gouging Welding Machine |
8 |
ZX5-630 ZX5-1000 |
Jan. 2013 |
| 13 |
Plasma Cutting Machine |
6 |
KLG 160 |
Mar. 2014 |
| 14 |
Vacuum Pump Units |
62 |
|
Jun. 2016 |
| 15 |
Airless Paint Sprayer |
6 |
PT9C-2539 |
Sep. 2015 |
| 16 |
Heavy Mobile Shot Blasting Machine |
1 |
SD1-1 |
Jan. 2016 |
| 17 |
Furnace for Heat Treatment |
1 |
24m×8m×9m |
Jul. 2015 |
5. Main Test Equipment
| List of Test Equipment |
| No. |
Equipment Name |
Qty. (Set) |
Function |
Using Date |
| 1 |
Portable Gas Detection & Alarm Device KP810 |
1 |
Gas Concentration Detection |
Aug. 2016 |
| 2 |
Smart Barometer LTP-203 |
1 |
Atmospheric Pressure Measurement |
Mar. 2017 |
| 3 |
Laser Range Finder PD-54K |
1 |
Measure Distance |
May. 2013 |
| 4 |
Roughness Tester TR100 |
1 |
Check Roughness of Polishing |
Jun. 2012 |
| 5 |
Ultrasonic Thickness Meter LEEB321 |
1 |
Measure Thickness of Material |
Mar. 2012 |
| 6 |
Ultrasonic Thickness Meter TT100 |
1 |
Measure Thickness of Material |
Aug. 2017 |
| 7 |
Computerized Film Thickness Meter MCH-200L |
1 |
Measure Surface Paint Thickness |
Apr. 2013 |
| 8 |
Coating Thickness Meter TT220 |
1 |
Measure Surface Paint Thickness |
Mar. 2017 |
| 9 |
Portable Rockwell Hardness Tester PHR-1 |
1 |
Check Hardness of Material |
Aug. 2013 |
| 10 |
Brovill Hardness Tester JAN-69 |
1 |
Check Hardness of Material |
Jun. 2013 |
| 11 |
Hydraulic Universal Tester WE-600B |
1 |
Recheck Material and Test Weld Mechanical Property |
Aug. 2006 |
| 12 |
Infrared Thermometer HT-816 |
1 |
Control Temperature between Weld Layers |
Mar. 2016 |
| 13 |
Pulse Spark Leak Detector DJ-6-B |
1 |
Check Lining Quality |
Feb. 2013 |
| 14 |
Pendulum Impact Tester JB-300B |
1 |
Recheck Material and Test Weld Mechanical Property |
Aug. 2006 |
| 15 |
Impact Tester for Cryogenic DWC-60 |
1 |
Impact Test for Cryogenic |
Aug. 2006 |
| 16 |
V-type Notch Projector SF-50 |
1 |
Impact Test Notch Dimension |
Aug. 2006 |
| 17 |
Hand-held Alloy Analyzer XL2 800 |
1 |
Analyze Chemical Component of Metal Material |
Aug. 2015 |
| 18 |
Helium Mass Spectrometer Leak Detector SFJ-211 |
2 |
Check Micro Leak |
Mar. 2018 |
| 19 |
Helium Mass Spectrometer Leak Detector ZQJ-230D |
1 |
Check Micro Leak |
Aug. 2013 |
| 20 |
Hydraulic Test Pump 4DY-100/10 |
5 |
Pressure-tight Test |
Sep. 2014 |
| 21 |
Pneumatic Testing Apparatus 2X8 |
2 |
Pressure-tight and Air-tight Tests |
Aug.2013 |
| 22 |
Strain Hardening System |
2 |
Strength and Reinforcement Tests |
Mar. 2017 |
| 23 |
Portable Precision Dew Point Instrument HKT-817 |
1 |
Measure Humidity |
May 2018 |
| 24 |
X-ray Detective Machine XXH3505 |
9 |
Check Weld Defect |
Sep. 2015 |
| 25 |
Computer Imaging Scanner (CR) HPX-1Plus |
1 |
Review Photographic Plate |
Oct. 2017 |
| 26 |
Nigrometer DM2010 |
2 |
Inspect Blackness of Photographic Plate |
Aug. 2015 |
| 27 |
Drying Box for Photographic Plate XJG-A |
2 |
Dry Photographic Plate |
Aug. 2013 |
| 28 |
Film Viewing Illuminator KT-900 |
3 |
Review Photographic Plate |
Aug. 2015 |
| 29 |
Ultrasonic Flaw Detector TS-2008L/TTS6208 |
2 |
Check Weld Defect |
Sep. 2012 |
| 30 |
Ultrasonic Testing Block CSK-IA/CSK-IIA/CSK-IIIA |
3 |
Measure K Value and Probe Front Edge/Make DAC Curve |
Aug. 2012 |
| 31 |
Magnetic Particle Flaw Detector |
1 |
Inspect Weld Surface and Near Surface for Defects |
Nov. 2016 |
6. Certificate
7. Stock
8. Packing and Transportation
9. Project Cases
10. Clients
11. Exhibition
){kind=link}